New South Wales Consolidated Regulations

[Index] [Table] [Search] [Search this Regulation] [Notes] [Noteup] [Previous] [Next] [Download] [Help]

STATE ENVIRONMENTAL PLANNING POLICY (EXEMPT AND COMPLYING DEVELOPMENT CODES) 2008 - REG 4A.12

Development standards

4A.12 Development standards

(1) The standards specified for that development are that the development must--
(a) not reduce the amount of light penetration to any water below, and
(b) not change the classification of any building under the Building Code of Australia , and
(c) not involve disturbance of or injury to the bed of any waterway or injury to any marine vegetation (as defined under the Fisheries Management Act 1994 ), and
(d) not increase the height or site coverage of the building concerned, and
(e) in the case of the repair or replacement of any crane, davit, slipway rails or winch--not be larger in size or capacity than the one being repaired or replaced, and
(f) not result in a pile being exposed within the waterway, and
(g) comply with AS 3962--2001, Guidelines for design of marinas and AS 4997--2005, Guidelines for the design of maritime structures , and
(h) if an approval is required under the Fisheries Management Act 1994 --be approved under that Act, and
(i) if an approval is required under the Protection of the Environment Operations Act 1997 --be approved under that Act.
(2) Despite subclause (1)(c), if the development is for the purpose of the removal or the replacement of damaged or degraded piles, the following additional standards are specified for that development--
(a) the development must not cause a deterioration in water quality,
(b) the development must use silt curtains or similar effective methods to control pollution,
(c) the development must not dispose of spoil in the waterway.



AustLII: Copyright Policy | Disclaimers | Privacy Policy | Feedback