The standards specified for that development are that the development must--
(a) satisfy the requirements of any applicable development control plan concerning its drainage systems and not interfere with the functioning of existing drainage fixtures or flow paths, and
(b) not require a cut or fill of greater than 2m from ground level (existing), and
(c) if it is a driveway or hard stand space--(i) be constructed in accordance with AS/NZS 2890.1:2004, Parking facilities, Part 1: Off-street car parking or AS 2890.2:2018, Parking facilities, Part 2: Off-street commercial vehicle facilities and RMS Australian Standard Supplements, Australian Standard--AS2890, Parking Facilities, Parts 1-6 issued by Transport for NSW, and(ii) be designed to allow all vehicles to turn around within the site and exit in a forward direction, and(iii) be designed and certified by a professional engineer, and
(d) if it is a driveway--have the consent required for a driveway under section 138 of the Roads Act 1993 from the appropriate roads authority, and
(e) if the development is a hard stand space--(i) be associated with a driveway, and(ii) be located at least 3m from any boundary that adjoins a residential zone, and
(f) if it is a pathway or paving area to be used for pedestrian access--be designed or constructed in accordance with AS 1428.1--2009, Design for access and mobility, Part 1: General requirements for access--New building work .