New South Wales Consolidated Regulations

STATE ENVIRONMENTAL PLANNING POLICY (EXEMPT AND COMPLYING DEVELOPMENT CODES) 2008 - REG 9.7

9.7 Additional development standards for erection or alteration of, or additions to, buildings

The following standards are specified for development referred to in clause 9.4(b)--

(a) for development on land within 2km of an aerodrome or airport--

(i) the development must not be carried out on land for which a PANS-OPS surface is identified that may compromise the effective and ongoing operation of the aerodrome or airport, as shown on a Procedures for Air Navigation Services--Aircraft Operations Map prepared by the operator of the aerodrome or airport, and

(ii) the building must not penetrate an obstacle limitation surface shown on an Obstacle Limitation Surface Plan prepared by the operator of the aerodrome or airport and reported to the Civil Aviation Safety Authority,

(b) for a landholding with an area of no more than 10ha--

(i) the height of a new building, or an existing building that was less than 7m tall before being altered or added to, must be no more than 7m above ground level (existing), and

(ii) the height of an existing building that is at least 7m tall must not increase as a result of the development,

(c) for a landholding with an area greater than 10ha--

(i) the height of a new building, or an existing building that was less than 10m tall before being altered or added to, must be no more than 10m above ground level (existing), and

(ii) the height of an existing building that is at least 10m tall must not increase as a result of the development,

(d) for a new building, or an existing building that is altered or added to, on land identified in an environmental planning instrument as "Land with scenic and landscape values" on a Scenic and Landscape Values Map or as "Scenic Protection Area" on a Scenic Protection Map or Scenic Protection Area Map--the height of the building must be no more than 7m above ground level (existing).