South Australian Current Regulations

[Index] [Table] [Search] [Search this Regulation] [Notes] [Noteup] [Previous] [Next] [Download] [Help]

AUSTRALIAN ROAD RULES - REG 35

35—Optional hook turn by a bicycle rider

        (1)         The rider of a bicycle turning right at an intersection without a hook turn only sign, or a no hook turn by bicycles sign, may turn right at the intersection by making a right turn under Division 2 or a hook turn under this rule.

Note—

"Bicycle" and "intersection" are defined in the dictionary.

        (2)         The rider must make a hook turn under this rule in accordance with subrule (3).

Offence provision.

        (3)         To make a "hook turn under this rule, the rider must take, in sequence, each of the following steps:

        1         Approach and enter the intersection from as near as practicable to the far left side of the road that the rider is leaving.

        2         Move forward—

            (a)         keeping as near as practicable to the far left side of the intersection; and

            (b)         keeping clear of any marked foot crossing; and

            (c)         keeping clear, as far as practicable, of any driver turning left from the left of the intersection,

until the rider is as near as practicable to the far side of the road that the rider is entering.

        3         If there are traffic lights at the intersection, remain at the position reached under step 2 until the traffic lights on the road that the rider is entering change to green.

        4         If there are no traffic lights at the intersection, remain at the position reached under step 2 until the rider has given way to approaching drivers on the road that the rider is leaving.

        5         Turn right into the road that the rider is entering.

Note—

"Approaching" and "marked foot crossing" is defined in the dictionary.

        (4)         To make a "hook turn" under this rule at an intersection that has a bicycle hook turn storage area on the left side of the intersection as the rider approaches the intersection, the rider must take the following initial 2 steps instead of the initial 2 steps listed in subrule (3):

        1         Approach the intersection from the far left side of the road the rider is leaving and enter the intersection by moving into the bicycle hook turn storage area, keeping clear of any marked foot crossing.

        2         Move forward in the bicycle hook turn storage area until the rider is as near as practicable to the far side of the road that the rider is entering.

Note—

"Bicycle hook turn storage area" is defined in the dictionary.

Example—

2014.205.un25.jpg

Example—

Bicycle rider making a hook turn at an intersection without traffic lights

2014.205.un26.jpg



AustLII: Copyright Policy | Disclaimers | Privacy Policy | Feedback