Victorian Numbered Regulations Victorian Numbered Regulations(1) A person must not manufacture a solid fuel heater unless it complies with AS/NZS 4012 and AS/NZS 4013.
Note
Act compliance—section 25(1) and (5) (see regulation 6).
(2) Without limiting subregulation (1), a person who manufactures a model of solid fuel heater must ensure that—
(a) a laboratory accredited by NATA or IANZ has tested each model of solid fuel heater being manufactured, in accordance with the procedures specified in AS/NZS 4012 and AS/NZS 4013, and the laboratory has confirmed it is satisfied that each model of solid fuel heater complies with—
(i) clause 9.1 of AS/NZS 4012 in relation to its overall average efficiency; and
(ii) clause 7.1 of AS/NZS 4013 in relation to the particulate emission factor produced; and
(b) the solid fuel heater is marked or labelled in accordance with section 8 of AS/NZS 4012 and section 10 of AS/NZS 4013.
Note
A mark or label that combines the information required by AS/NZS 4012 and AS/NZS 4013 is suitable.