Victorian Consolidated Regulations

ROAD SAFETY ROAD RULES 2017 - REG 35

Rule 35(1) amended by S.R. No. 135/2021 rule 14(2).

    (1)     The rider of a bicycle or an electric scooter turning right at an intersection without a hook turn only sign , or a no hook turn by bicycles sign , may turn right at the intersection by making a right turn under Division 2 or a hook turn under this rule.

Note to rule 35(1) amended by S.R. No. 135/2021 rule 14(3).

Note

"Bicycle", electric scooter and intersection are defined in the dictionary.

    (2)     The rider must make a hook turn under this rule in accordance with subrule (3).

Penalty:     2 penalty units.

    (3)     To make a hook turn under this rule, the rider must take, in sequence, each of the following steps:

    Step 1     Approach and enter the intersection from as near as practicable to the far left side of the road that the rider is leaving.

    Step 2     Move forward—

        (a)     keeping as near as practicable to the far left side of the intersection; and

        (b)     keeping clear of any marked foot crossing; and

        (c)     keeping clear, as far as practicable, of any driver turning left from the left of the intersection—

until the rider is as near as practicable to the far side of the road that the rider is entering.

    Step 3     If there are traffic lights at the intersection, remain at the position reached under step 2 until the traffic lights on the road that the rider is entering change to green.

    Step 4     If there are no traffic lights at the intersection, remain at the position reached under step 2 until the rider has given way to approaching drivers on the road that the rider is leaving.

    Step 5     Turn right into the road that the rider is entering.

Note

Approaching and marked foot crossing are defined in the dictionary.

    (4)     To make a hook turn under this rule at an intersection that has a bicycle hook turn storage area on the left side of the intersection as the rider approaches the intersection, the rider must take the following initial 2 steps instead of the initial 2 steps listed in subrule (3):

    Step 1     Approach the intersection from the far left side of the road the rider is leaving and enter the intersection by moving into the bicycle hook turn storage area, keeping clear of any marked foot crossing.    

    Step 2     Move forward in the bicycle hook turn storage area until the rider is as near as practicable to the far side of the road that the rider is entering.

Note

Bicycle hook turn storage area is defined in the dictionary.

Examples

1     Bicycle rider making a hook turn at an intersection with bicycle hook turn storage area

2     Bicycle rider making a hook turn at an intersection without traffic lights

Rule 36 (Heading) amended by S.R. No. 135/2021 rule 15(1).

Rule 36 amended by S.R. No. 135/2021 rule 15(2).